PLACEMENT
PIVOT
The head insert is attached using zip ties through eyelets located at 12 and 6 o’clock. This allows the disc to pivot along centerline and let the wind pass thru. Other eyelets are located at 3 and 9 o’clock to affix the head. Check insert to make sure the unused tabs do not interfere with its ability to pivot.
ROTATE
Point the figure in the designated direction or at a specific location. It may be necessary to rotate the angle slightly for sighting clarity. This often occurs when signaling continued travel along a path without turning.
SECURE
2 or 3 Sandbags totaling 20-25 lbs. are used to secure the figure in place. An additional bag is suggested for windy conditions. Also, 4 tabs with 1-inch eyelets are located in the base for use with stakes or ropes.
PIVOT
The head insert is attached using zip ties through eyelets located at 12 and 6 o’clock. This allows the disc to pivot along centerline and let the wind pass thru. Other eyelets are located at 3 and 9 o’clock to affix the head. Check insert to make sure the unused tabs do not interfere with its ability to pivot.
ROTATE
Point the figure in the designated direction or at a specific location. It may be necessary to rotate the angle slightly for sighting clarity. This often occurs when signaling continued travel along a path without turning.
SECURE
2 or 3 Sandbags totaling 20-25 lbs. are used to secure the figure in place. An additional bag is suggested for windy conditions. Also, 4 tabs with 1-inch eyelets are located in the base for use with stakes or ropes.